INOVANCEelectronics from China
Shenzhen Inovance Technology Co., Ltd.
China's top manufacturer of AC drives by volume. AC drives, servo drives, PLCs, HMIs and motion controllers for OEMs and end users.
Electronics
Easy Series PLC
Range of small PLCs from 24 mm wide — from a simple pulse-output controller to a multi-axis EtherCAT motion controller. Easy301 (4 pulse axes, 128 K steps), Easy302 (5 axes, CANopen via GE20 card), Easy320 (dual Ethernet: Modbus TCP, EtherNet/IP), Easy502 (16 synchronised EtherCAT axes) and Easy523 (32 axes, EtherCAT plus dual Ethernet, 200 K steps, 2 MB). All have 8 DI and 8 DO, 4 encoder channels at 200 kHz, a USB Type-C port, up to 16 GL20 modules and two GE20 card slots. AutoShop: LD, SFC, ST with FB/FC blocks and simulation; CAM and interpolation to PLCopen on all models except Easy301.
- Models
- Easy301 (24 mm), Easy302 (40 mm), Easy320 (53 mm, Ethernet); Easy502, Easy523 (EtherCAT)
- Motion axes
- Easy301 — 4 pulse; Easy302 / Easy320 — 5 pulse; Easy502 — 16 synchronised (EtherCAT, up to 5 pulse); Easy523 — 32
- Slaves
- up to 72 EtherCAT; Modbus TCP up to 32; CANopen / CANlink up to 62; Modbus RTU 16 (recommended)
- Built-in I/O
- 8 DI (NPN/PNP) and 8 DO (NPN); 4 encoder channels (8 high-speed inputs, 200 kHz)
- Memory and speed
- Easy300: 128 K steps, 1 MB (128 KB non-volatile), 20 K steps / 2 ms; Easy500: 200 K steps, 2 MB, 20 K steps / 1.6 ms
- Interfaces
- Easy301: RS232 + RS485; others: RS485 + 2 GE20 card slots (RS232/485, CAN, RTC, TF); Easy320 / Easy523: dual Ethernet (Modbus TCP, EtherNet/IP); USB Type-C
- Expansion
- up to 8 (Easy301) or 16 GL20 modules 12 mm thick; 2 GE20 card slots (except Easy301)
- Programming and power
- AutoShop: LD, SFC, ST, FB/FC with encryption; PLCopen; CAM and interpolation (except Easy301); 24 V DC
MD520 High Performance Universal AC Drive
Universal AC drive: 0.4–500 kW on 3-ph 380–480 V, 0.4–75 kW on 3-ph 200–240 V and 0.4–2.2 kW on 1-ph 200–240 V, frames T1–T12. Unified control of induction and PM motors: V/F, SVC (150 % at 0.25 Hz) and FVC (180 % at 0 Hz); heavy duty 150 % for 60 s, normal duty 110 % for 60 s. STO SIL 3 / PL e, built-in braking unit up to 75 kW and DC reactor from 18.5 kW, 3C3/3S2 coated PCBs, IE2 class to IEC 61800-9-2. Communications via option cards only: Modbus RTU (MD38TX1), Modbus TCP, PROFIBUS-DP, PROFINET, EtherCAT, EtherNet/IP and CANopen; master-slave control, output up to 599 Hz.
- Power range
- 3-ph 380–480 V: 0.4–500 kW; 3-ph 200–240 V: 0.4–75 kW; 1-ph 200–240 V: 0.4–2.2 kW (−15 % to +10 %, 50/60 Hz)
- Control
- V/F, SVC, FVC; induction and PM synchronous motors; 4 motor parameter sets; output up to 599 Hz
- Starting torque
- 150 % at 0.25 Hz (SVC); 180 % at 0 Hz (FVC)
- Overload capacity
- heavy duty 150 % for 60 s; normal duty 110 % for 60 s
- Communications
- Modbus RTU via MD38TX1 option card; option cards for Modbus TCP, PROFIBUS-DP, PROFINET, EtherCAT, EtherNet/IP, CANopen, CANlink
- Functional safety
- STO SIL 3 / PL e
- Built-in components
- braking unit up to 75 kW (400 V) / 37 kW (200 V); DC reactor from 18.5 kW (400 V) / 11 kW (200 V)
- Enclosure and efficiency
- IP20 (frames T1–T9), IP00 (T10–T12); IE2 class to IEC 61800-9-2; 3C3/3S2 coated PCBs
SV670 Servo Drive
Standard servo series succeeding the SV660 for MS1 motors from 50 W to 7.5 kW, four interface variants: SV670P (pulse up to 4 MHz), SV670C (CANopen CiA 402), SV670A (CANlink) and SV670N (EtherCAT). Speed loop bandwidth raised to 3.2 kHz, 1.6 µs current loop cycle at 12 kHz carrier. 23-bit absolute encoder, second encoder input for full closed loop. STO SIL 3 in the FS version, dynamic braking as standard, five notch filters 50–8,000 Hz (two adaptive), ITune auto-tuning. The USB Type-C port powers the control board from a PC, so parameters and firmware load without mains power.
- Power range
- 0.05–7.5 kW (MS1 motors 50 W to 7.5 kW)
- Supply voltage
- 1-ph 220 V, 1/3-ph 220 V, 3-ph 220 V, 3-ph 400 V; frame sizes A–E
- Control interfaces
- SV670P — pulse up to 4 MHz; SV670C — CANopen (CiA 402); SV670A — CANlink; SV670N — EtherCAT
- Dynamics
- 3.2 kHz speed loop bandwidth; 1.6 µs current loop cycle, 62.5 µs speed and position loop cycles; 12 kHz carrier
- Encoder
- 23-bit single/multi-turn absolute; second encoder input for full closed loop
- Functional safety
- STO SIL 3 (IEC 61800-5-2) in the FS version; dynamic braking as standard
- I/O
- SV670P: 8 DI, 5 DO, 1 AI (12-bit), 1 AO; SV670N: 5 DI, 2 DO, AI, AO
- Tuning and connectivity
- USB Type-C powering the control board, RS485 Modbus RTU; ITune / STune / ETune; 5 notch filters 50–8,000 Hz (2 adaptive)
H5U PLC
Compact EtherCAT PLC for multi-axis motion control in an 83 × 90 × 95 mm housing: up to 32 synchronised axes (EtherCAT or up to four 200 kHz pulse axes) and up to 72 EtherCAT slaves; electronic cam and axis groups with linear and circular interpolation to PLCopen. Onboard 16 DI and 14 DO with high-speed channels, EtherCAT, Ethernet, CAN (CANopen/CANlink), RS485 (Modbus RTU), USB and SD; up to 16 local GL10 modules. 200 K-step program, 2 MB of variables (256 KB retentive). AutoShop (LD, SFC, FB/FC) with simulation and trace.
- Motion axes
- up to 32 synchronised axes (EtherCAT, or up to 4 pulse axes); up to 72 EtherCAT slaves
- Built-in I/O
- 16 DI (NPN/PNP, 4 × 200 kHz, 2 encoder channels) and 14 DO (NPN, 8 × 200 kHz — 4 pulse axes)
- Memory
- 200 K-step program; 2 MB user variables (256 KB retentive); approx. 150 KB soft elements
- Interfaces
- EtherCAT; Ethernet (Modbus TCP, socket); CAN (CANopen / CANlink master and slave); RS485 (Modbus RTU, free protocol); USB; SD card
- Expansion
- up to 16 local GL10 modules (AM600 series); GR10 / GL20 remote modules as EtherCAT slaves
- Motion functions
- PTP, electronic cam (CAM tables), axis groups with linear and circular interpolation to PLCopen; servo control via CANopen
- Programming
- AutoShop: LD, SFC, function blocks FB/FC; simulation mode, trace tool
- Power and dimensions
- 24 V DC; 83 × 90 × 95 mm
MD630 Advanced Compact AC Drive
Book-type compact AC drive: 0.4–90 kW heavy duty and 0.75–110 kW normal duty on 3-ph 380–480 V; frames T1–T5 (up to 22/30 kW) mount side by side. Two variants: MD630N with EtherCAT, PROFINET, EtherNet/IP and Modbus TCP onboard, MD630S with RS485 Modbus RTU and extended I/O. V/F, SVC and FVC control of induction, PM synchronous and synchronous reluctance motors; option slot for encoder cards (ABZ, SinCos, SSI, BiSS-C, EnDat, resolver). STO SIL 3 / PL e, built-in braking transistor and C3 EMC filter, operation up to 60 °C, 3C3/3S2 coated PCBs, iFA Drive software.
- Power range
- 0.4–90 kW (heavy duty) / 0.75–110 kW (normal duty); compact frames T1–T5 up to 22 / 30 kW
- Supply voltage
- 3-ph 380–480 V (−15 % to +10 %), 50/60 Hz
- Control
- V/F, SVC, FVC; induction, PM synchronous and synchronous reluctance motors
- Feedback (option card)
- ABZ incremental (HTL / Line Driver), SinCos, SSI, BiSS-C, EnDat, Inovance 23-bit, resolver
- Communications
- MD630N — EtherCAT, PROFINET, EtherNet/IP, Modbus TCP onboard; MD630S — RS485 Modbus RTU
- Functional safety
- STO SIL 3 / PL e
- Built-in features
- braking transistor, C3 EMC filter (10 m), USB Type-C port, colour LED keypad, option card slot
- Enclosure and ambient
- IP20; −20 to +60 °C (derating above 50 °C); IE2 class to IEC 61800-9-2; 3C3/3S2 coated PCBs
SV660N EtherCAT Servo Drive
Single-axis EtherCAT servo drive for MS1 motors from 50 W to 7.5 kW on 220 V (single-/three-phase) and 3-ph 400 V. 4.5 kHz current loop bandwidth, 1.6 µs current loop cycle, 62.5 µs speed and position loops; 125 µs EtherCAT cycle in all seven CiA 402 modes, ±20 ns synchronisation jitter across 300 nodes. 23-bit absolute encoder (8,388,608 p/rev), up to four notch filters, STune/ETune auto-tuning. STO SIL 3 in the FS version, safe braking via short output winding, 3C2/3S2 coated PCBs. Five frame sizes A–E from 170 × 40 × 150 mm — on average 30 % smaller than the previous generation.
- Power range
- 0.05–7.5 kW (MS1 motors 50 W to 7.5 kW)
- Supply voltage
- 1-ph 220 V, 1/3-ph 220 V, 3-ph 400 V; frame sizes A–E from 170 × 40 × 150 to 250 × 90 × 230 mm
- Dynamics
- 4.5 kHz current loop bandwidth; 1.6 µs current loop cycle, 62.5 µs speed and position loop cycles; 12 kHz carrier
- EtherCAT
- 125 µs cycle in all modes; ±20 ns synchronisation jitter; CoE CiA 402: PP, PV, PT, HM, CSP, CSV, CST
- Encoder
- 23-bit serial single/multi-turn absolute (8,388,608 pulses per revolution)
- Functional safety
- STO SIL 3 (EN/IEC 61800-5-2) in the FS version; short output winding for safe braking
- Tuning
- up to 4 notch filters; STune / ETune auto-tuning; parameter cloning over EtherCAT; guided commissioning software
- Design
- isolated cooling channel; 3C2/3S2 conformal-coated PCBs (IEC 60721-3-3); pluggable connectors
IS810N Multi-Axis Servo Platform
Modular multi-axis servo platform on a common DC bus: an MD810 rectifier (22–355 kW) feeds single- and dual-axis IS810N modules of 0.85–75 kW (dual axis up to 18.5 kW) in 50 and 100 mm widths. Built for precision machinery: 4.5 kHz current loop, 1.6 µs current, 62.5 µs speed and 125 µs position loop cycles; full EtherCAT CiA 402 support (seven modes, distributed clock) and a dedicated Ethernet port with Modbus TCP/IP for remote diagnostics. 23-bit absolute encoder, automatic inertia identification, four adaptive notch filters. STO SIL 3 with independent inputs per axis, InoDriverShop software.
- Axis module power
- single axis 0.85–75 kW; “2 in 1” dual axis 0.85–18.5 kW (3.5–152 A)
- Supply voltage
- 3-ph 380–480 V (+10 / −15 %), 50/60 Hz; DC bus 537–679 V (working range 350–800 V); 24 V DC auxiliary
- Rectifier modules
- MD810 22, 45, 110, 160 and 355 kW on a common DC bus
- Dynamics
- 4.5 kHz current loop bandwidth, > 2 kHz speed loop; 1.6 µs current, 62.5 µs speed, 125 µs position loop cycles
- EtherCAT and service
- CiA 402: PP, PV, PT, HM, CSP, CSV, CST; distributed clock; Ethernet port with Modbus TCP/IP for remote service
- Encoder
- Inovance 23-bit single/multi-turn absolute; EnDat 2.2 interface; second encoder input for full closed loop
- Functional safety
- STO SIL 3 (EN/IEC 61800-5-2), dual inputs independent for each axis
- I/O and dimensions
- 6 DI (2 fast) + 2 DO per axis; 50 mm (size 1) and 100 mm (size 2) wide modules
IT7000 HMI
Linux-based operator panels in 7", 10.1" and 15" sizes with up to 1,024 × 768 resolution: IT7070T/E on a 600 MHz Cortex-A8 with 128 MB memory, IT7100E/IT7150E on a 1 GHz Cortex-A8 with 256 MB. Ethernet (E models), three serial ports (RS422/RS485, RS232, RS485), USB Type A, mini-USB, micro-SD. Drivers for Inovance, Siemens, Mitsubishi, Omron, Delta and other PLCs, Modbus RTU/TCP, OPC UA client and MQTT; VNC remote access. InoTouchPad environment (Linux + Qt) with JavaScript scripting, trends and multi-language interface. 24 V DC supply, IP65 front panel, 30,000–50,000 h backlight life.
- Models and sizes
- IT7070T / IT7070E — 7"; IT7100E — 10.1"; IT7150E — 15"
- Resolution and display
- 800 × 480 (7"), 1,024 × 600 (10.1"), 1,024 × 768 (15"); 24-bit colour; LED backlight 300–350 cd/m²
- CPU and memory
- Cortex-A8 600 MHz, 128 MB DRAM / 128 MB flash (7"); Cortex-A8 1 GHz, 256 MB DDR3 / 256 MB flash (10.1" and 15")
- Interfaces
- Ethernet (E models); COM1 RS422/RS485, COM2 RS232, COM3 RS485; USB 2.0 Type A; mini-USB download port; micro-SD (except IT7070T)
- Protocols
- Inovance, Siemens S7-200/300/1200/1500, Mitsubishi FX/Q/L, Omron FINS, Keyence, Panasonic, Delta, Yaskawa, Fatek, Xinje, Koyo; Modbus RTU/TCP, OPC UA client, MQTT
- Functions
- VNC remote access from mobile devices; JavaScript scripts and plug-ins; recipes, trends, oscilloscope; multi-language; real-time clock
- Power supply
- 24 V DC ±20 %; 250 mA (7"), 300 mA (10.1"), 800 mA (15"); 3.0 V lithium battery
- Protection and service life
- front panel IP65, rear IP20; backlight life 35,000 h (7"), 30,000 h (10.1"), 50,000 h (15"); InoTouchPad software (Linux + Qt)
MD810 MultiDrive System
Modular common-DC-bus multidrive for sectional machines. A 22–355 kW rectifier module feeds 1.5–160 kW drive modules; “2 in 1” dual modules of 1.5–18.5 kW hold two drives in a 100 mm wide unit. Regenerated energy is shared over the bus, a braking unit is built into the 22 and 45 kW rectifiers. V/F, SVC and FVC for induction and PM motors, overload 150 % for 60 s and 178 % for 2 s; master-slave, load sharing, droop, centre winder and wobble functions are standard. IS810N servo modules fit the same line-up. STO SIL 3, InoDriveShop software.
- Drive module power
- single 1.5–160 kW; “2 in 1” dual 1.5–18.5 kW
- Rectifier modules (PSU)
- 22, 45, 110, 160 and 355 kW; braking unit built into 22 and 45 kW
- Supply voltage
- 3-ph 380–480 V, TN and TT networks; DC bus 537–679 V (working range 350–800 V); 24 V DC auxiliary
- Control
- V/F, SVC, FVC; induction and PM synchronous motors; output up to 500 Hz; switching frequency up to 12 kHz
- Overload capacity
- 150 % for 60 s; 178 % for 2 s
- Feedback
- resolver, ABZ incremental, Inovance 23-bit absolute encoder
- Communications
- Modbus RTU, CANopen, CANlink, PROFIBUS-DP; PROFINET and PROFIBUS-DP to CANopen gateways
- Safety and protection
- STO SIL 3 (EN 61800-5-2); IP20 (355 kW PSU IP00); 3C2/3S2 coated PCBs; −10 to +50 °C
MD880 High Performance MultiDrive
Engineering drive platform for heavy-duty applications in two topologies: MD880-01S single drive 5.5–450 kW and a common-DC-bus multidrive of 3.7–5,600 kW with basic 6/12-pulse, regenerative or active front-end rectifier (THDi < 5 %). Voltage classes 380–415 V and 525–690 V, light-duty 110 % and heavy-duty 150 % overload for 1 min in 5. FVC with ±0.01 % accuracy and 1:1000 range, torque response ≤ 5 ms, starting torque 200 % at 0 Hz. HCU controller with plug-in SD card and three slots (encoders, I/O, fieldbuses), black box for 50 faults, parallel operation of up to 10 modules.
- Power range
- MD880-01S single drive: 5.5–450 kW (400 V); multidrive: 3.7–5,600 kW
- Supply voltage
- 3-ph 380–415 V (class 4) and 3-ph 525–690 V (class 7), ±10 %; 47–63 Hz; single drive 380–480 V
- Rectifiers
- basic 6/12-pulse (99 % efficiency), regenerative (> 98 %), active front end (> 97 %, THDi < 5 %, adjustable cos φ)
- Control
- V/F, SVC, FVC; speed range 1:50 / 1:200 / 1:1000; FVC accuracy ±0.01 %; torque response ≤ 5 ms; output 0–300 Hz
- Starting torque
- 150 % at 0.5 Hz (SVC); 200 % at 0 Hz (FVC)
- Overload capacity
- light duty 110 % for 1 min in 5; heavy duty 150 % for 1 min in 5
- Communications and expansion
- PROFINET IO, PROFIBUS-DP, Modbus TCP, Modbus RTU, CANopen, Ethernet adapters; InoLink bus (EIA-485, 5 Mbit/s) and Inobus optical fibre bus (HOFM-10/30 cards); 3 HCU slots (up to 7 with extender)
- Safety and protection
- STO; modules IP00, cabinets IP21 (IP23 / IP43 optional); −10 to +40 °C (up to 50 °C with derating); EN 61800-5-1
MD200 General Purpose Compact Drive
Open-loop compact AC drive: 0.4–2.2 kW on single-phase 200–240 V and 0.4–3.7 kW on three-phase 380–480 V. One 180 × 75 × 145 mm enclosure covers all nine ratings; wall, DIN-rail or side-by-side mounting. V/F and SVC control with 150 % starting torque at 3 Hz, overload 150 % for 60 s and 180 % for 3 s, output up to 500 Hz, built-in braking unit. Modbus RTU over RS485, CANlink variant; single-phase models carry a C3 EMC filter. 3C3/3S2 coated PCBs, operation up to 50 °C. The MD200-NC version has selectable NPN/PNP inputs.
- Power range
- 1-ph 220 V: 0.4–2.2 kW; 3-ph 400 V: 0.4–3.7 kW (9 ratings)
- Supply voltage
- 1-ph 200–240 V or 3-ph 380–480 V (−15 % to +10 %), 50/60 Hz
- Control
- V/F and sensorless vector control (SVC); 150 % starting torque at 3 Hz
- Overload capacity
- 150 % for 60 s, 180 % for 3 s
- Max. output frequency
- 500 Hz
- Communications
- Modbus RTU (RS485); CANlink variant
- Braking unit
- built-in on all ratings
- Enclosure and ambient
- IP20, fan cooled; up to 50 °C (derating above 40 °C); 180 × 75 × 145 mm frame
FAQ — INOVANCE
What equipment does SDS supply from INOVANCE?
SDS delivers the full INOVANCE product range including electronics. Detailed series, sizes and technical specifications are available on this page; full PDF catalogues can be downloaded from the Catalogues section.
In which industries is INOVANCE equipment used?
INOVANCE equipment is applied in packaging, machine tools, food industry and textile and other industries. We select a specific model for your duty cycle, load profile, working environment and ambient conditions.
What is the warranty and lead time for INOVANCE?
Standard manufacturer warranty — 12 months from commissioning, no more than 18 months from shipment. Production lead time is 4–16 weeks depending on specification (the equipment is manufactured in China, Guangdong Province, Shenzhen). Delivery to Russia is by road transport. Detailed terms are on the Terms of Cooperation page.
How to order INOVANCE equipment from SDS?
Send a technical request with operating parameters and requirements. Within one business day we prepare a technical-commercial proposal with firm pricing and delivery schedule. Default Incoterms — DDP (with EAEU certification and customs clearance included).
Need help with INOVANCE?
An SDS engineer will size the unit for your load and quote it — usually within one business day.