MD810MD810 Series AC MultiDrive System 400 V
MD810 MultiDrive System INOVANCE
Manufacturer: INOVANCEModular common-DC-bus multidrive for sectional machines. A 22–355 kW rectifier module feeds 1.5–160 kW drive modules; “2 in 1” dual modules of 1.5–18.5 kW hold two drives in a 100 mm wide unit. Regenerated energy is shared over the bus, a braking unit is built into the 22 and 45 kW rectifiers. V/F, SVC and FVC for induction and PM motors, overload 150 % for 60 s and 178 % for 2 s; master-slave, load sharing, droop, centre winder and wobble functions are standard. IS810N servo modules fit the same line-up. STO SIL 3, InoDriveShop software.
Specifications
- Drive module power
- single 1.5–160 kW; “2 in 1” dual 1.5–18.5 kW
- Rectifier modules (PSU)
- 22, 45, 110, 160 and 355 kW; braking unit built into 22 and 45 kW
- Supply voltage
- 3-ph 380–480 V, TN and TT networks; DC bus 537–679 V (working range 350–800 V); 24 V DC auxiliary
- Control
- V/F, SVC, FVC; induction and PM synchronous motors; output up to 500 Hz; switching frequency up to 12 kHz
- Overload capacity
- 150 % for 60 s; 178 % for 2 s
- Feedback
- resolver, ABZ incremental, Inovance 23-bit absolute encoder
- Communications
- Modbus RTU, CANopen, CANlink, PROFIBUS-DP; PROFINET and PROFIBUS-DP to CANopen gateways
- Safety and protection
- STO SIL 3 (EN 61800-5-2); IP20 (355 kW PSU IP00); 3C2/3S2 coated PCBs; −10 to +50 °C
Applications
- Wire drawing machines and cable lines
- Calenders and rubber/plastics processing lines
- Textile lines and chemical fibre production
- Paper machines and printing lines
- Metal processing lines
- Centre winders and unwinders
We will select the right size for your task and prepare a quotation under a direct SDS contract.
