WD1000WD1000 Series High-Performance Engineering Drive (690 V / 1140 V)

Medium Voltage VFD WOLONG WD1000

WD1000 is Wolong's engineering drive for 690 V and 1140 V systems, rated 315–5600 kW. The inverter uses ANPC (active neutral point clamped) technology and is three-level in the C and CL versions; inverter efficiency exceeds 98.6 % and diode rectifier efficiency exceeds 99.2 %. Control modes are VVVF, SVC and FVC with a range up to 1:1000, starting torque 200 % at 0 Hz, peak torque 150–250 %, torque response under 5 ms. One controller drives up to three vector axes or eight scalar axes and supports a common DC bus. Air or water cooling, noise below 75 dB.

Specifications

Power and voltage: 315–5600 kW at 690 V; the 380–500 V range covers 250–2800 kW and the 690–1140 V range 450–6500 kW; input 380–500 / 525–690 / 700–1140 V ±10 %, 45–65 Hz; multi-motor version 540–2000 V DC
Topology: ANPC; versions A and B two-level, C and CL three-level (CL water-cooled); 6-, 12-, 18- and higher pulse rectifiers, regenerative or active front end (iTHD < 3 % at full load)
Control modes: VVVF, SVC, FVC; up to 3 vector or 8 scalar axes per controller; common DC bus
Torque and accuracy: starting torque 200 % at 0 Hz, peak 150–250 %; torque response < 5 ms; speed accuracy 0.01 %; range 1:50 (VVVF), 1:200 (SVC), 1:1000 (FVC)
Overload and efficiency: 110 % continuous (light duty), 150 % for 1 min in every 5 min (heavy duty); inverter efficiency > 98.6 %, rectifier > 99.2 %
Output frequency: 0–1000 Hz (derating above 120 Hz, above 550 Hz by agreement)
Communication and safety: 6 DI / 6 DO and STO as standard; PROFIBUS-DP, PROFINET, DeviceNet, Modbus TCP, EtherCAT, CANopen, J1939 sub-cards; Modbus RTU to supervisory level, CAN 2.0B between drives; HTL/TTL, SSI and resolver encoder cards; 10″ panel (7″ and 15″ options)
Protection and conditions: IP20–IP54, RAL 7035; air or water cooling; −10…+40 °C, humidity ≤90 % at 25 °C, up to 2000 m (−1 % power per 100 m); noise < 75 dB; vibration class 3M4 to GB/T 4798.3